Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Specialty Roofing Across Winchester
Specialty roofing in Winchester means low-slope work: TPO, EPDM, and modified-bitumen membranes on flat roofs, not asphalt shingles on pitched gables. If you own or manage a motel, apartment block, or low-rise commercial building near the Strip corridor, we’re the crew to call. Our technicians have up to 10 years of experience, and we know this ZIP. Reach us at (844) 941-3509 and a live person answers, day or night.
Why Ridgeline Roofing Co. Sunrise Manor Is Winchester’s Preferred Specialty Roofing Company
Winchester is a hard place to roof well. The heat is punishing, the buildings are dense, and most of the roof area in 89109 is flat membrane sitting under a row of HVAC condensers. We’ve built a reputation here on getting those seams and drains right, not on covering them with a fresh coat of mastic and hoping. Homeowners and property managers in Winchester call us back because the first repair held. That matters in a market where a leak means a tenant complaint or a closed unit, not just a stain on the ceiling.
We show up when we say we will, and the price on the estimate is the price on the invoice. We pull the county permits the work requires. Every job carries the 90-Day Done Right Promise in writing: if it isn’t right, we come back and make it right, no paperwork, no arguing. That’s the whole offer, and it’s why people in Winchester pass our number to a neighbor.
Styles & brands we work with
- Architectural shingles
- Metal roofing
- Tile roofing
- GAF
- Owens Corning
- Flat & low-slope
Our Specialty Roofing Services in Winchester
The systems that make sense on a Winchester roof are the ones built for flat decks and desert heat. Here are the ones we install and repair most often in 89109.
TPO Roofing in Winchester
TPO is the workhorse on Strip-corridor commercial and multi-family buildings because it reflects sun and holds a seam under UV. On Winchester roofs, the failure we see most is a clogged scupper that lets monsoon runoff pond against an unreinforced seam or a condenser curb. We clear the drainage first, then re-seam and re-flash to manufacturer spec so the membrane is sound before the next storm season.

EPDM Roofing in Winchester
Older low-rise blocks around Winchester often carry EPDM that’s been baked for decades under 100°F-plus summers. The black rubber dries and shrinks at the laps and penetrations long before the field sheet looks worn. When we assess an EPDM roof in Winchester, we check the seam laps and the boot details around every pipe and curb, because that’s where the water gets in.

Modified Bitumen in Winchester
Modified-bitumen systems are common on Winchester’s older motel and commercial roofs, and they take a beating from heat and grit. Windblown desert dust settles into the surface and clogs drains and scuppers, so ponding finds the weakest flashing ring. We clear the drainage, repair the granule loss and laps, and confirm the roof drains to the scuppers the way it was meant to.

Solar Ready Roofing in Winchester
More Winchester property owners are planning rooftop solar, and a flat membrane roof is a good candidate if the deck and seams are sound first. We assess the roof before panels go up so you’re not paying to remove an array to fix a seam later. If the membrane is at the end of its life, we tell you before the solar goes on, not after.
Trusted Brands We Service in Winchester
We’re an authorized installer of seven leading manufacturer lines, including CertainTeed, Owens Corning, IKO, and Atlas. That means proper materials and no substitutions when we quote a Winchester job. We don’t keep a warehouse of parts in town, so lead times depend on the manufacturer’s supply, but we order the right system for the deck and get it on the roof without cutting corners on the specified underlayment or edge metal. When a membrane or accessory is back-ordered, we tell you the real date instead of guessing.
See the difference
Before
After
Before
After
Before
AfterCommon Specialty Roofing Problems We See in Winchester Homes
- Clogged drains and scuppers from Strip-corridor grit. Windblown desert dust collects in the low points and drain rings of Winchester flat roofs, so the first real monsoon microburst pond water against seams and condenser curbs that were never adequately flashed.
- UV and 100°F-plus heat frying exposed single-ply. The sun dries out mastic at penetrations and weakens laps long before the field sheet looks worn, so failed sealant and split seams show up years ahead of the membrane itself.
- Condenser curbs that leak at the mechanical joint. Rooftop HVAC condensers sitting on the same deck create chronic ponding-and-leak points, and a curb that wasn’t reinforced into the field membrane is the first place water finds a way in.
- Scope and permitting mismatches on lots with outbuildings. When a Winchester property has a shop, detached unit, or added structure, the work crosses into Clark County review, and bids that skip the extra decking, ice and water shield where required, and edge metal underestimate the square count.
Pricing for Specialty Roofing in Winchester, NV
What you’ll actually pay in Winchester depends on membrane type, square footage, and how much drainage and flashing work the roof needs. As a ballpark for this market: a targeted TPO or EPDM repair around a drain or condenser curb typically runs $400 to $1,200; a full re-flash of drains and penetrations on a small commercial roof runs $1,500 to $4,000; and a complete low-slope membrane replacement on a Winchester building generally runs $6 to $12 per square foot installed, with modified-bitumen toward the higher end. If the scope includes new mechanical curbs or an outbuilding, Clark County review adds time and cost. Call (844) 941-3509 for a free written line-item estimate.
We Also Serve Cities Near Winchester
We work across the east valley and the communities around Winchester. If you’re just outside 89109, we cover Winchester and the neighboring areas of Paradise, Las Vegas, Whitney, and Sunrise Manor. Same low-slope systems, same county permitting, same written promise. Call and tell us where the building is; we’ll confirm we can get to it.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Specialty Roofing in Winchester
Ponding near a condenser curb usually means the drain or scupper serving that area is clogged with desert grit, or the curb flashing was never tied into the field membrane so water stalls against the mechanical joint. Winchester’s windblown dust fills low points fast, and once the drain is blocked, the membrane takes the load. A qualified pro clears the drain, checks the slope, and re-flashes the curb to manufacturer spec. Call (844) 941-3509 to schedule a free inspection.
Yes. A real Winchester specialty quote covers the membrane plus drainage (drains and scuppers), penetration boots, condenser curb flashing, edge metal, and any required underlayment or decking repair. Bids that price only the field sheet miss the details that actually leak and underestimate the job. Ask for a line-item written quote so you can see what’s included before you sign. Estimates are free at (844) 941-3509.
Because 89109 is unincorporated Clark County, not a city, specialty scopes that include rooftop mechanical curbs or new outbuildings route through county review rather than a city building department. That adds a step for plan review and inspection, and it’s a cost some low bids leave out entirely. We pull the permits the work requires and pass the inspections before we call the job done. Call (844) 941-3509 to talk through what your scope needs.
For most Strip-corridor commercial and multi-family buildings, TPO is the common choice for its reflectivity and seam strength; EPDM is a solid fit for existing rubber roofs being repaired or matched; and modified bitumen suits older motel and low-rise buildings where the deck and details call for it. The right answer depends on the deck, the drainage, and the load from rooftop equipment. Call (844) 941-3509 for a free assessment of which system fits your building.
Before the 100°F-plus summer arrives, check that every drain and scupper is clear of grit, that sealant at penetrations and condenser curbs is intact, and that no water is ponding after a rain. Heat and UV dry out single-ply and crack mastic, so catching those details early is cheaper than a seam failure in July. An $89 seasonal tune-up clears the drainage and documents the roof’s condition. Call (844) 941-3509 to schedule yours.
Written by the team at Ridgeline Roofing Co.